4 link and bags

The trucks up on the lift at my parents house now so tomorrow I will snap some pics of the install so far. Got the tank, compressor, and front valves mounted. Most of the plumbing for the front is done. My Honda had an actually switch box and if I wasnt holding it, the damn thing would fall off the dash going around corners and the car would start hopping around. So on this truck I just mounted 4 switches in the dash with a digital air gauge. Thats all done too. I will also have bag controls on my key faub. Just need that 4 link, 2 more bags, and 4 more valves. I think I have everything else. Do you sell bags and valves Chris? I have 1/2 single port RE7 SS bags in the front and would like to use SS bags for the back. The valves are 1/2 somethin or others. (no name)

I sure do!

Update. I got the front bags on. I cut the frame out where the bag goes up. I saw some other guys doing it so I guess it was ok? haha. Looks like it made the necessary clearance for the bag when its collapsed. Next I am going to notch the frame where the tierods are. I was thinking of cutting it out and welding in a half piece of pipe? Doesnt look like it needs much.

Chris, I am still saving for the 4link. I have a kid on the way so I gotta share the wealth! Ill let you know soon.

No problem man, whenever your ready.

Well, here is some updated pics of my truck. Ended up doing a 2 link with bag on bar and a panhard in the rear. I scored some 22's and started shaving some stuff.

Pics

Any pics of the setup??

is it just my eyes or does the truck not lay out all the way?..it looks like you can see light under the frame in the pics...its damn close though...and x2 on pics of the setup

Edited: 11/5/2011 10:57:51 PM by 93fullsize

Haha, busted. Originally it was setup for 20's but when i put the 22's on it, i could no longer lay frame. Needless to say I have some cutting to do up front along with a bigger notch in the rear. I did get some shit at Westcoast for not being able to drag. Pretty sad. I have pics of the setup somewhere. I need to find them. Link system not working though. I used 2x2 steel on the link bars and its bending. It was pretty think wall stuff too. 4 link is coming soon. If I cant find the setup pics, I will take pics of the bent 2x2 when I take the bed off again.