2 linking a 89 toyota pickup

the plan is to run 30 inch link bars mounted on the inside of the stock frame rails.my ? is that the rear end is 3 inch diameter then goes to about 4 inch.pics of how people have done there 2 links would b great.im do n a 2 link so i can keep the back seat when i put the 4runner body on.

thanks in advance jeff hunter

I don't have any pics of a 2 link but I do have a 93 4runner on a 90 yota fram with the back seat and I'm running a paralle 4-link w/panhand bar, bags over axle works great rides smooth.

5 links are better than 2


:XL:

If you can get away from running a 2-link then do so ,you will have problems ...!! i just got done turning a 2-link into a 4-link ,the stress it to much for the toyota rearend it will crack the axle tubes very bad, then you are in for it ....!!! when doing the rear suspension take the extra time to figure out what it will take to make it real nice and its the one place that u really should spend a few more bucks ,its well worth it in the long run..!!!!

after many phone calls with chris at unusual fabrication. i will be going with a triangulated 4 link with bags over the axle.

jeff hunter

bman619 (Bryan Dorn)
what size rims are u running? did u have to cut into the doors?

jeff hunter

running 18x8 40mm offset with 225/40/18 tires. for now at least, im not positive on how much was cut for the rear wheels as a fellow member of mine built the suspension and 4runner swap but from what i can see there was a cut into the stock wheel well but not the area where the door jam is.

running 18x8 40mm offset with 225/40/18 tires. for now at least, im not positive on how much was cut for the rear wheels as a fellow member of mine built the suspension and 4runner swap but from what i can see there was a cut into the stock wheel well but not the area where the door jam is.

running 18x8 40mm offset with 225/40/18 tires. for now at least, im not positive on how much was cut for the rear wheels as a fellow member of mine built the suspension and 4runner swap but from what i can see there was a cut into the stock wheel well but not the area where the door jam is.

bman619 (Bryan Dorn)
thanks for the info.
i have a set of 19. think im go n with 17.
im go n for a old school look

jeff hunter