Ven's Project Pathfinder

i like this.

Finally got the rear doors finished up with the latches all working, reworked the linkage so both the interior and exterior door handles still function! They open and close nice and smooth just like they should!!

[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/59750_4153765495151_622568578_n.jpg[/IMG]

[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/12980_4153766455175_661500222_n.jpg[/IMG]

[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/5512_4153767095191_898860295_n.jpg[/IMG]

Made some progress on the pathfinder this weekend, relocated the clutch cylinder / pedal assembly up into the cowl area and moved the brake booster and pedal assembly over about 2 inches. Who needs Wilwood, not this guy...keeping it all Nissan here! Just need to rework the pedals now. Gonna finish the tubs in the firewall next. Time to get this thing on the road!

[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/clutchandbrake.jpg[/IMG]

[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/pedalassembly.jpg[/IMG]

Did a little work last night...
[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/246498_4349611231172_704094711_n.jpg[/IMG]
I got the brake booster / pedal and clutch cylinder / pedal mounted and test fit the steering column before I start to re-configure the pedal arms. Its all close but no interference so it should work out well.
[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/575963_4349611431177_732610771_n.jpg[/IMG]
The pedals are just a little out of alignment at the moment...lol
[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/291699_4349611671183_1216811450_n.jpg[/IMG]
Slowly but surely inching forward on progress, I am really looking forward to getting this thing on the road again!!

Started tubbing the firewall, pretty much formed all the pieces by hand. Im still planning on adding trailor fenders in the engine bay too, but I dont want to do that until I pull the body off the frame for the last time. Just makes it a little easier to take it off. Then I can tie them all into the aprons and core support. But I want to get most of the sheet metal work done on the cab before I do any of that.

[IMG]http://i55.photobucket.com/albums/g131/ven10328/My%20rides/firewalltubs.jpg[/IMG]

Finished up the firewall last night, and now getting ready to get started on the trans. tunnel. I forgot to take some pics of the firewall but I Figured I'd snap a quick pic of both trucks for your viewing pleasure...lol