b2 on toyota frame

Ok so i can get a 1985 Bronco 2 and a toyota frame not shore what year the frame. the vehicals belong to my girls dad he said he belives its an 1985 toyota short bed 2wd. is there any year to stay away from. i know that most people are cliping the rangers but could i just use the whole toyota frame and put the bronco 2 body on it. any info would help thanks.

just use the front clip of the yota, and build the rest. your gonna end up wanting to bodydrop it and it would be easier to just go ahead and build a SFBD chassis for it since your doing all that work anyways.... just sliding the toyota frame under it would make you have to build an entire floor to match the frame

yea it looks prety flat but ok. is the year a good year couse i dont feel like wasting my time and money to end up having to get another frame

You can use that clip, but the frame would be too long and need to be shortened anyway. May as well just stock floor it and be done with it.

sorta sounds like your in over your head. your talking serious safety issues here.

im not being a computer cop, but you might want to visit your local customizing shop and get some in depth info instead of a website.

not saying you wont get great info here, but what your talkin is a BIG job, and in the end, yours and everyone around you life could be in danger

(sorta sounds like your in over your head. your talking serious safety issues here.

im not being a computer cop, but you might want to visit your local customizing shop and get some in depth info instead of a website.

not saying you wont get great info here, but what your talkin is a BIG job, and in the end, yours and everyone around you life could be in danger)

Your right about the saftey and i have a friend with a welding licence to weld the frame in a safe manner. the general question was would the frame work in its stock state. looking on here and other sites and from comments its a no and a 2x3/2x4 frame is what i will need to get it to the ground. thanks