Rear disc brake conversion pre taco rear end help

Thanks for the reply tre5 I sent you an email about the brake kit and a few questions let me know if you received it

I got it. Thanks!

<b>Edited: 1/19/2013 12:09:18 PM by KandyDakota<br></b>Well I just got my REAR svo rotors in this afternoon and got home to try them out and the center hub diameter is slightly larger then my hub. Putting them up to the drum i pulled off... it seems to be about a 1/16 or so bigger.

The SVO is 2.79" = 70.866mm

Are you all having to use some kind of centering ring or what am I missing??

From what I have found the toyota rearends seem to be 2.63" = 67mm

Any ideas or suggestions?

Thanks

After relooking at things this morning, I dont think I really have an issue... More of a late night, long day, needed to not be in the garage freak out.. haha

This is not a problem as when you put the lug nuts on they will center the rotter. You will need to do this to check the caliper also!!

<b>Edited: 1/21/2013 8:43:41 PM by spider97<br></b>I need a kit for a tacoma. Tre5 will you be making these?

I have a Tacoma axle here. I will eventually get going on a kit for it.

All you need is Monte Carlo 79-85 front calipers and 84-85 Mustang SVO rear rotors
The brackets are available on ebay or any offroad company that makes yota stuff