threads
Page 1 of 1
Dually Suspension \  Bump steer c30 dually

Bump steer c30 dually

Dually Suspension Dually Tech
views 942
replies 0
following 1
 
garagebuilt   +1y
I keep looking but cant find anything on my exact situation so ill ask here. i know not many people get on here but i dont know where else to look. i have stock upper and lower arms. the lowers were plated to mount the bag. the spindles are 3 inch drop. stock dually hubs and brakes. everyone says these trucks are bad about bump steer. im getting over two inches of toe change. it looks like the pivot point needs to be right in the center of the mounting point on the spindle. not sure what brand these spindles are but im afraid they are my problem. its toeing out when dropped so i moved the tie rod to the top side and it makes it toe in about the same. thats what makes me think it needs to be right in the middle which is impossible.
Page 1 of 1