Shot in the dark here...

you can look at a street rodder mag and look at the ads for heidt's or tci.etc.. The problem you may have is that mustang 2 crossmembers need a pretty flat square frame and a s10 front clip is anything but. You may run into the same problem ranger guys do- motor clearance due to the large square crossmember. That's why I went with the toyota clip.

I'm going to use it on a full new 2x3 frame, so that won't be a problem. And they make the arms anywhere from stock length, to 5/8" to 1" narrower for added clearance. I just want to know the overall track width of both suspensions to make sure everything will fit between my fenders. Neither Heidts, TCI, Fatman Fab, Scott's Hot Rods, Art Morrison, or any I've looked at so far show any avaliable track widths.....

^^^Is my friend.^^^

Yes Sir!!

if your using a 2x3 frame I would just order the crossmember for the narrowest frame. Probaly for a model A. Then you would have the most choices for A arm width.

and that's why i wanted the track widths.... to choose which cross member and arms....

I got a mustang II kit under my 36 see if you can get trevor to measure it for you tommoroww, I will be away from the shop or I would do it for you. It is close enough to the stock track as I did not have to mod the rack any to get the alignment.

look at u go baller damn

Thanks Scott! TREVOR! DO YOU SEE WHAT THAT MAN SAID!? ^^ WHOOP OUT THE MEASURING TAPE!

2 pages and yet, still no answer...I love it!

It's the meaningless drivel which drives us.