75 Dually Project - 22s and stylin

I can't wait to see what everyone thinks about what I'm working on. This is going to be polarizing. Either your going to like it or not... Either way the opinions are going to fly!

Oh now I'm being a tease again! Dang it!

Stay tuned!!!

OK I decided to give ya'll a hint. The guys on Garage Forum were dying to know so I gave them this pic tonight after all my hard work today. Yes it is bigger than a bread box, and it's under that blue tarp. Let the guessing begin!

Sleeper cab window extension? I only guess that because it looks pretty big...

Hey i got the 3/4 srw rear put in. My old rear was a little too far back so i came forward around 2 inches. I still don't have full engagement on the dive shaft slip joint. Just wondering if you ever measured how much yours sticks out. I have about 2.5 inches overlap with about 1 inch of spline showing.

OK I caught a nasty chest cold and I can't work on the Dually for a while. However I have been wanting to do a video build series on it from the beginning to current day. So I got part 1 completed tonight. Check it out and let me know what you think.

https://www.youtube.com/watch?v=BcGJa-OTZyM

I should have the mystery item completed in a couple of weeks, health permitting!

Stay tuned!;)

Garagebuilt - I measured mine to what the drive shaft folks told me to. So mine is perfectly back to factory specs with the 3/4 ton rear end. Not sure why you had to move yours at all. You might want to check the centerline of your rear end and make that right first of all, and then worry about the drive shaft length. I hope that helps some.

Part 2!!

Check it out!

https://www.youtube.com/watch?v=VcbV3T4AueY

Part 3 is out now! Check it out and let me know what you think.

https://www.youtube.com/watch?v=-NYrMUc_0bo

Part 4 is ready for your viewing pleasure!

Check it out!! I hope you enjoy these videos...

https://www.youtube.com/watch?v=7gPSNrfBnBo

Nice project ! I always like seeing updates, sorry I don't comment much. I'm curious how much videos would be used, if you could upload videos to your thread do you think you would use that feature?