I NEED BLUEPRINTS

Anyone good at making blue prints? I dont really know what needs to be on them, there for my Suspension fab guy, just do he know's exactly what i want as per F.B.S.S Setup... Anyone help me out here? Thanks!

I think there's a sticky in one of the sections with frame diagrams. Those might help. They have all the dimensions and crap.

if you can, try to find someone that has done a yota or mazda before. not that the guy cant weld or anything but its the little things that count.. like in the front i dont think many people use a tapemeasure for the first side its just trial and error, tack it.. cycle the suspendion, if it aint right move it. i think my brackets are like 3/4 inch or something from the top of the frame rail and horizontily it all depends where you mount it on the bottom and how you mount it.. ssm is that in sue st. marie?.. in the back, if he hasend done a four link.. he should be payin you for lettin him practice on your truck..unless he is a good buddie or givin a real good deal i would try to find someone who has worked on a mini before...2 cents

if you like to hear excuses later,......
if not, go with experience.

prob is even if he does good work its gonna take more time and trial and error
that you will be payin for.

A little required tweaking is fairly normal.

He specializes in 4x4 Lifts, Custom overall...and some lowered, not sure about the Air part though...

oh, well the plumbing is easy , its the fabrication and suspension geometry, that needs attention, he just need s to think about parts moving upward rather than down
The front end may be his biggest challenge, bring him pics and let him study it first, prolly be fine.
Best o luck to ya!

Yea, i hope so, He said he wants blue prints of exactly what i want done. Blue prints with measurements im guessing? I dont really know what to do...

And Pictures for him to study would be great...POST UP SOME PICTURES PPL!!

Any one gimmie an idea of an Average Blue print, and what its suppose to Include.

And I Think He said about $150-250 for the Front and $300-350-400 for the rear. I cant remember exactly..What do you's all think? he owns his own business, specializes in 4x4 lifts, etc.. not to many going the other directly, as well as other frame work (replacing cab mounts, leaf mounts, etc..)...

take him pictures and lell him it has to lay fram when its done.. if he is capable he will tell you if he cant do it from the pictures..than nahh do let him touch it.. where are you located?

a lot of lifts are bolt on... make sure he doesn't specialize in bolting parts onto trucks.
talk to his previous customers, and see if they like what he did, and ask to see what he did.
it's true, an inexperienced person will take longer, and the results will most likely be sub-par. you won't be as stoked as you would if you had some minitrucker extrordinare bag your whole truck in a weekend and it lays out hard with bitchin welds.

Alright...Im going to talk to him, this up coming week