threads
Page 3 of 3
Mazda Projects \  pics of fuel tank locations

pics of fuel tank locations

Mazda Projects
views 4844
replies 23
following 16
 
nytrdr24   +1y
it's been a while since i posted a pic of progress on my truck....here goes



i took it w/my camera phone so excuse the image quality...this is from where i initally had it tacked into place......i had to take it out so i could move it forward to make room for the hidden hitch....still haven't had time to get it back in yet...need to do some grinding on the frame where the spare tire x-member was mounted before i put it in tho as there won't be room to fit the grinder in there once i have welded it back in...
southernrazed   +1y
im getting one made...7 inces deep 18.5 inces wide and 25 inces long...will fit snug between my rails im using an inline fuelpump from summit
nytrdr24   +1y
i think mine is like 9" deep (add an inch for the sump) 22" l x 15" w...16 gal. even with having to drop it 1 1/2" down from the top of the frame rail to clear the fuel return fittings it still doesn't hang below the rear chunk.
i started to get one of the summit pump kits w/ the pump & regulator, but it wouldn't regulate below 7 psi, which was too much for my weber 38, it only requires @ 3 psi & 90-100 gph....any more & you will flood the fuel bowl...
laynrail   +1y
Havent got a pic of mine, but mine is mounted to the frame above my fourlink up against the cab wall.

Stock tank... If you have a bigger BD than 2 inches it would be a tight fit though.