FINALLY smaller tires put on

cool! it wouldve looked badass! i showed him your truck and it just pissed him off!! since his truck burned he bought a 94 volvo

haha, ya i finally reprimered the top part grey again, and i be damned if i didnt run out of primer at the last stage so my hood looks like poo, so ima go buy some more tommarow and re-do and wet sand it its funny how many compliments u get on how good ur primer looks.


ACtually the blue is a base coat so it has some shine to it.

FuckYeah.... Much Better......

i know thw feeling man i get comps on primer too, i also get the famous question when are you gonna paint it.

i get that at least 3 times a day, i just finally re-primered it and touched up my gas door im no body man so im actually really happy on how it came out, theres a nice dent that i un covered so ima take it to a body shop and get that fixed, i touched up on the liscence plate,gas door, and front turn signals, and re-primered the top half grey again

sweeeeet!

hey man if you could post up some pictures of how you have your front bags installed that would be sweet. i have a good idea of how i should do mine but i would like to see it done in a truck like mine

ask and you shall recieve, the bags are being held in by 2x4 steel tubing cut to fit snugly into the cup pocket, welded a bolt on top of the 2x4 so i can bolt it down, and drilled to holes to hold the bag on the bottom.

Most people use torsion kit but this setup only cost me $10 total lol and it lays and ive never had a problem.

#1. Is how much you need to cut out so you dont rub.
#2. Is a bumpstop that can easily be removed by one bolt.
#3. Is another bumpstop that needs to be trimmed so it doesnt rub your bag
#4. Is were you prolly will have nice drag marks on your control arms
#5. Chains are only for if you want to hop.

how high can you hop it? i never really understood why people put chains so they can hop, what do they hold down? do they hold anything down? what are they for?

at 150psi i pulled the front wheels off the ground around 3", chaining your control arms down reduces pulling ur ball joints apart.