geterdun
+1y
I am converting my '93 B2600 to non-computer with a modified '86 B2200 distributor and dualjet (half a quadrajet) carburator. I need a simple diagram of the wiring of the distributor and coil on a B2200 to accomplish this. i have tried wiring blue distributor lead to - coil post, other to + coil post with the condenser. Hot to + coil post, ground to negative coil post. the distributor is out of the engine with these attached. When I turn the distributor shaft, as the engine would do, I get no spark, any corrections or ideas. Have tried with and without resister on coil lead.
The module coil has 900 ohm resistance, module is new, round coil is new, condenser is new.
Ric