Brake bleeding help!

I believe there's an arrow on the backplate which points up, so screwdriver gets pulled down to move the adjuster wheel up to make the brakes tighter.

I did adjusted the rear brake and problem is still the same. Nothing has changed. Going to install the GM mc back in to see if any luck.

Hi guys,

Problem has solved! The issue was the push rod is not adjusted far enough. So, I adjust it in another 1/4". Now it works like it was before.
I thought if i swap out the 1" master cylinder will get a better brake respond. Unfortunately, nothing different. I want a better brake respond. Does any one have any ideas? Thanks for all the help!