threads
Page 1 of 1
Mazda Engine General \  v8 ? laying frame

v8 ? laying frame

Mazda Engine General Mazda Engine Mazda Tech
views 1126
replies 8
following 4
 
so_low_it_hrz   +1y
do you have to mod your oil pan if your laying frame
mark   +1y
im almost positive a 302 or 350 factory pan clears the stock engine crossmember
slammed91b5000   +1y
yah im layin and i got a stock pan. its far from the ground. but i made my motor mounts tall so i would not have to notch the crossmember liek the ultimate customs kit.
baggedb22   +1y
I'm layin frame with a 351w in my mazda, i have the oil pan bolt about an inch off the ground, and i notched the front crossmember for the oil pan to sit in. I was tryin to kepp my motor under a stock hood but i couldn't lay frame and kepp it under the hood so i built a 2 1/2 cowl hood, and raised it just a lil... The hardest part im having right now is getting it to lay frame with the v8 and not lay on the exhuast..lol...
baggedb22   +1y
What kinda v8 are u talkin about??
so_low_it_hrz   +1y
302 thanks for the info
baggedb22   +1y
Good ol' FORD motor thats what im talkin about need any help get at me or im me LowRidinMazda16 on aim i did the 351w swap which is basically the same thing...
so_low_it_hrz   +1y


cool . how long did it take to put it in and driveing
baggedb22   +1y
We'll it's not a hard swap but it was all the little things that killed me, i've hade my truck off the road for about 2 years not, thats getting the motor & tranny putting it in, ordering everything for the air ride, building everything for the air ride and tons of little shit...I'm gonna put it away for the winter so i can have it reliable for spring...
Page 1 of 1