threads
Page 1 of 2
Mazda Lowering Static \  Pros and Cons of forward or reversed 4 link ?

Pros and Cons of forward or reversed 4 link ?

Mazda Lowering Static Mazda Suspension Mazda Tech
views 1321
replies 10
following 9
 
hutch75   +1y
Ok guy I need pros and cons on setting up my 4 link. I realy dont want to move my gas tank so I was told to do a reverse set up. I have heard alot of bad things about doing it reversed. So what are the pros and cons of either setup.
slammed83mazda   +1y
Your better off trying to run a wishbone 3 link if you want to keep the gas tank in the stock location....

Here is a good example of a foward and reverse 4 link setup watch the video..

sketchystreet   +1y
i was gunna post that up too. beat me to it
mazdamandan   +1y
yeh, been havin the same debate , I think the wishbone is gonna be the best idea too.
hutch75   +1y
what about doing a 50/50 lower bar going towards the front top going to the back?
lost_b2200   +1y
50/50 doesn't really control much and you probably don't want your axel twisting funny. all bars going the same direction would be better.
slammed83mazda   +1y
pinion angle is the worse part of a 50/50.

my buddy has been running a 50/50 for almost 3 years and its his daily and no problems.
slammeddime   +1y
Take a read over my research paper on forward 4 link suspensions and that may give you some insight into your questions...
balcar   +1y
There is a reason why manufactures don't do it.
lowblownranger   +1y
yeah those videos should be enough to make anyone rethink about doin a reverse four link ......