threads
Page 1 of 1
Mazda Lowering Static \  Hard dropped static guys...

Hard dropped static guys...

Mazda Lowering Static Mazda Suspension Mazda Tech
views 1115
replies 9
following 7
 
laydoutb26   +1y
Hey i was just wondering who all has really low static drops... can i get a frame height and rocker height? maybe a front and rear mid fender height?

also, what all was done?

<copy>
Frame height under back of cab (about middle of truck)
rocker height under back of cab (measuring from pinch)
Front mid fender height
rear mid fender height
LOWEST PART AND PART HEIGHT
<copy>
______________________________________________________________________

92 B2600i

Frame height under back of cab (about middle of truck) - 4.75"
rocker height under back of cab (measuring from pinch) - 6.5"
Front mid fender height - 22.75"
rear mid fender height
a. aired down - 24.75"
b. aired up - 31"
LOWEST PART AND PART HEIGHT
Catylitic Converter 2" off ground!

FRONT
flipped balljoints
removed bumpstops
cranked torsion bars

REAR
mono leaf
2" block
air shocks
maztang (ryan)   +1y
my 89 was rolling with 4" drop blocks and 2 leafs, 3" lower control arms and torsions cranked about an inch. rear bump stops were cut in half and the frame was sitting on them. the frame under the door (if i remember right) was about 3" off of the ground. i pulled the drop blocks out last weekend because they were painful. haha. now she looks retarded but rides a lot smoother, i hope to be bagging the rear soon.
lowblownranger   +1y
Frame height under back of cab (about middle of truck) 4 inches
rocker height under back of cab (measuring from pinch) 5.25 inches
Front mid fender height 22.25 inches
rear mid fender height - beds off
LOWEST PART AND PART HEIGHT
front crossmember 2.5 inches
twistedsmily   +1y


yeah thats about what Ive got to not too much from that
twistedsmily   +1y
im runnin, no t bars or bump stops up front three inch blocks with monoleaf and no bumpstops out back
1lob2k   +1y
mine is the same as twisted's. No t bars, or bumps, mono leaf, with 3" blocks and no bumps out back
crazymikey   +1y


wanna sell the blocks?
crazymikey   +1y
I'm monoleafed,with 3" blocks and cut bump stops.

Up front,I've got cranked torsions,flipped ball joints and I run Toxic shocks on all 4 corners.


And it's not low enough.
2fine89   +1y


HAHA never low enough !!
crazymikey   +1y
it ain't low enough till I bag that shit!
Page 1 of 1