any suggestions on baggin the front ofmy b2600

hey guys i am going to bag my b2600, what are my options for the front other than buying new control arms?
any info will be greatly appreciated
thanks
N8
<img src="{SMILIES_PATH}/icon_question.gif" alt=":?:" title="Question" />

what size rims are you running? you can lay out on modified stock suspension parts up to 18&quot;




-justin

i think i am just gonna roll some escalade wheels for now

you can lay out with the stock suspension stuff then




-justin

ok thanks. then if i wanted to go bigger than 18s i would need to buy new control arms right?

no you could just buy some 2 inch drop spindles and be good.




-justin

if you run anything bigger than a 6 inch bag youll have to drop the sway bar down about an inch for clearance and cut off all bump stop brackets

thanks guys, you rock!!!!

actually you can lay out on eskies with stock parts but I would suggest getting drop spindles if you want your rubber to last as with stock spindles you will get some serious tire wear camber will be a definite issue if you don't cid has been driving his truck fully aired for 3 months and his tires still look mint no wear other than regular use.

depends how low u drive. you can lower your truck and get it realigned, they'll fix your cambercaster and toe at a new lower altitude, and then your golden. or save your tires and air up the front a couple inches. simple.