front lower bag plates

ok so im about to mount my lower front bag plates and was wondering if they are a universal plate or if they are built to size with the bag.... the plate that I have only the center bolt lines up with the bag, the two outer bolt holes don't line up with the bolt holes on the bag..... do I have the wrong size plate?? or should i drill out the plate to accommodate the bolt holes in the bag... or do i just need to use the center bolt to hold the bag.... just want to see what all you guys used or did to make it work.... thanks in advance... i can get pics up if any of you need them

Just use the center bolt. Ive never seen a lower plate that has more than one hole in it.

I was thinkin bout that the other day, I am only using 1 bolt too , its all I can do to get the bolt in through the lca, as it is. but it should be fine use a high grade bolt.

the way the top o the bag bolts in, its impossible to line up the bolts below the holes line up to the sides o the lca, i am using re-6

lol yeah I've been trying to figure out how people have bolted the bag on that plate mounted to the LCA so low... I assume you drill a hole threw the LCA and bolt it in that way??? anyway i planned on using grade 8 bolts anyways, just didn't know why all the holes didn't mount up... but i guess if you only need one bolt then ok...

makes scene....

if there was another way ,....
I'd bolt it as much as possible but,......
hmmmm, tubular triangulated LCA, thats the way

yeah i hear ya... 1 bolt doesn't seem like enough... but like you said if there was another way....

problem is arm kits are soo pricey!!!

I am gonna work on a template/jig, and once I get it to work, I'll post specs 4 everyone to use
or for those without tools I'll build em and sell em cheaper

nice....