Stacking drop blocks?

you could always go with a bigger wheel combo....17/18s up front and 20s on the rear

You could do a z notch behind the cab, which will give you a drop of however many inch z you do, where as a c notch only gives axle clearance and no drop, just do the z before the front leaf spring mounts... I did that with mine, went 3 inches, and have 3in blocks, factory leaf packs, and on 205/40r16s I have about 3 inches of frame clearance under the rear of the cab before the frame kicks up

I understand its not a good idea but I've ran two 3" blocks stacked for 4 years on my Tacoma, the first 2 years were not tacked, i drug threw my leaf springs so getting new years i got my blocks tacked together been doing great, alot of people around here do it also but get them tacked

IF.... U were to stack blocks I would get them welded together. I wouldnt run them but to each there own. I know I've done things others wouldnt. So no bashing from me.

I ran stacked blocks for years with hydros and never had an issue . I hear horror stories but mine were fine. The only thing I can tell you is to make sure your u bolts stay tight.