Fiber Glass Cowl Induction Hoods

YES LIKE THAT... WANNA SELL IT TO ME

I cannot sell this one , but could maybe build another . They are very easy to make . Just use the Harwood or up22 S10 Cowl style hood . It will follow the contour of the Mazda hood perfectly . You will only need to trim the end for the Windshield and fix the center line to make it come to a point

I fabbed it myself . Actually quite easy . At the time I was not around this site much , should have done a Tech article on this aswell , probably alot of the things on the truck

Looked at your Profile . The area in the backround looks quite Familar . Havent been back to Ontario in a couple

so the s10 hood fits mazda? i have really wanted this hood for about a year but wasn't able to just find the cowl to put on mine... but if the whole hood works, then $199 is sounding good!

my first mazda i used an 87-93 mustang hood to make a cowl hood. the side angles run parrellel as the angles of the body lines of the mazda hood. you can buy a cheap pin on hood for one and make it fit a mazda.i dont like the s-10 one cause the ridge in the middle.

ive seen showdowns hoods. they actually let you walk on them. they are very tough.

So are you guys saying that the S-10 hood will fit on the Mazda? Just a lil bit of triming?

Sorry people misread what I wrote/meant . I used the Stock Mazda hood as my starting platform . I then ordered a Cowl from Up22 that is made for the S-10 truck they have 4-5 different sizes they also have different styles of cowls . They will all work since they have the proper curve on the bottom side of the cowl/scoop . You will then have to mold it into your stock hood which is very easy

Read post above I think some misread what I wrote or I worded it wrong when I wrote it

Part Number for the scoop I used from up22.com is SC-404