My Project! (New Picutres 5/13)

Is it me or is you filler neck on your gas tank going the wrong way

Since my gas tank is set so far back the filler neck would run into my rear skin (welded the back end shut) im not going to have my plate on the skin, it'll be mounted to a retractable actuator, so i flipped the tank around and im just gonna run the new filler neck straight up and have a gas door in the bottom of my raised bed floor...

Well this weekend i got a TON done. went out and got a new rearend since mine was junk, got it sandblasted and smoothed out right after i got it home, put in back in the truck and mounted the newly painted gas tank. I also smoothed and painted my driveshaft, and painted my hood hinges






Set up my blazer center console and ready to fiberglass the shift area


And shaved my mirrors

Damn man, you worked hard this weekend! everything is lookin great!

should you rebalance it after it's painted? looks pretty good so far!

Alright so my 4 link finally got here thursday, so i decided to get it in this weekend! i spend the first part of my day making the front crossmember and driveshaft loop then i started on the lower bars only to run out of welding gas... i was not happy. with it being saturday evening no places are open sunday. so i am gonna use my friends bottle for tomorrow and finish everything up and get it in paint. let me know what you think! thanks

Kyle

Okay i finially finished up most of the 4 link, all i need to do now is get my new rims and tires mounted and put on and mount the rear bags. should be laying out the front this weekend and maybe pulling the motor if i have enought time. let me know what you think! thanks

Kyle

The front of your upper link mounts should be up a bit higher. But other than that, it looks like solid work.

do your upper link bars hit that cross bar they look really close to me

With those huge stock tires they come close but with the smaller caddy wheels and tires i'll have a bit of room