harris1
+1y
Dope Build!!! i dont think there is one thing i dont like about this thread, great info!
keep it up man
keep it up man
korrupt1
+1y
I finally just went thru the whole thread. Awesome work!! You make me wanna bag mines....I love the speed....just about perfect in my eyes. How much faster would 3/8 b ober that? I dont think I would do 1/2" and 3/4" be just way too crazy fast!
droppedmydawg
+1y
I don't know how to describe the speed difference to you, but if you have seen a 1/2" set up and you have seen mine, just figure that 3/8" is right in the middle of the 2. The speed is just right for me. I did not want any added stresses to my frame, but i do not want to wait too long to air up, so 1/4" was perfect. Thanks for the good words guys.
I switched my front bags out today from RE-6's to Dominator 2500's. I now get 1.75" more lift at 100psi than before and my normal ride height is achieved at 60 psi instead of 80 psi. I am stoked! I put my gauge cluster w/ tach in also, but still need to figure out what wire I need to run for the tach since my harness is a frankenstien between the 2200 and RX-7 harnesses. And the biggest update is my new BAG SHACK battery hold down. Pics will be up as soon as AT&T gets my internet hooked up to my computer. I am stealing time on the in-law's computer now. Thanks for checking the thread and stay tuned for a self lifting bed soon. -Ed
I don't know how to describe the speed difference to you, but if you have seen a 1/2" set up and you have seen mine, just figure that 3/8" is right in the middle of the 2. The speed is just right for me. I did not want any added stresses to my frame, but i do not want to wait too long to air up, so 1/4" was perfect. Thanks for the good words guys.
I switched my front bags out today from RE-6's to Dominator 2500's. I now get 1.75" more lift at 100psi than before and my normal ride height is achieved at 60 psi instead of 80 psi. I am stoked! I put my gauge cluster w/ tach in also, but still need to figure out what wire I need to run for the tach since my harness is a frankenstien between the 2200 and RX-7 harnesses. And the biggest update is my new BAG SHACK battery hold down. Pics will be up as soon as AT&T gets my internet hooked up to my computer. I am stealing time on the in-law's computer now. Thanks for checking the thread and stay tuned for a self lifting bed soon. -Ed
sleepyspeed
+1y
so I seen you on the scene today. Whats up hows the truck going? I want to see this lifting bed!!! lol!
1hotdawg
+1y
A very nice build thread here man. First one I've seen with 1/4" lines and I have to say I like it! Thanks for adding the vid. I'd like to see the lift on the Dom's as well. Looking forward to the bed tilt too. Think I wanna do a regular dump style on one of my trucks.
devb22
+1y
Where are you man?
It's been over two months since your last update?
I wanted to see this thing finished...Lol
Hope you are doing well, and still kickin'!!!
It's been over two months since your last update?
I wanted to see this thing finished...Lol
Hope you are doing well, and still kickin'!!!
droppedmydawg
+1y
Well I don't have any huge news other than I am keeping my truck and I finally found a 2600i hood in decent shape. I also got a new compressor so I can spray some good quality primer sealer. I also finished my center console a few months ago and never got pics up. Here they are.
And I dumped her in the in-laws yard and burned the grass real good with the exhaust. LOL
More to come...
And I dumped her in the in-laws yard and burned the grass real good with the exhaust. LOL
More to come...