Lokar shifter and cadillac wheels

Hi,
I 'm new to the site and have a few questions that I hope I can find answers to on here.
First off, does anyone know what lokar shifter will fit an automatic trans from a b2200? I saw one in minitruckin' about a year ago, but called lokar and that can't seem to give me a straight answer. I also have a set of '08 escalade wheels, do I need to have them milled for a proper fit? Any help would be appreciated.
Thanx

The Caddy wheels need to be machined or the hubs need to be modded to fit. Check forums for a how to, lots of info here for this. Maybe someone can post a link? As far as the shifter is concerned, I'd like to know that as well. My shifter is about shot and I need an upgrade!

thanx for the info, i'll look for the posts about modding the wheels

O8 wheels should be the done the same way. Did all my wheels this way. Just make sure the bearing on the router bit is riding on the outside lip as he explains in the video.

Welcome to the scene!

welcome...those caddys will look real nice on your truck! But like posted above you will need to have them drilled and tapped

welcome. enjoy. and remember to post plenty of pictures
as far as the caddies go you could grind your hub tabs... alot of folks here that run or have ran caddies (including myself) and other hub centric wheels which hubs are to small to fit, have ground hub tabs... there is a how to here on the site.

thanx to all who chimed in about my question, I'll check out the "how to's" and give an update with pics when its done

you do not have to drill and tap these wheels.






-justin

gotta say, that lil how to vid on boring out was pretty cool of the guy to post up...a big help....dunno why but I dont wanna shave off my tabs for some reason