86d50lover
+1y
I am in the process of bagging and bodying my d50 but i have run into a problem. The wheels won't tuck into the bed fenders. the front tucks fine because of the fender flares on the front well i wouldn't say fine but they do tuck barely and it lays hard in the front. but anyways i need advice on what i should do. i have talked to my club members and they suggested i either get the rear end narrowed or find a bed with flares. idk what i should do. the wheels have almost no ofset so its nothing to do with that. the tires are low pros so its not the tires and the wheels are only 15's. the just won't tuck without the flares. The wheels like about 3/4's of an inch on both sides from tucking. please if you got any other suggestions please tell me. thanks to all.