87 xtracab Long bed

Here she is Stationary dropped on 18s with torsions let all the way out and mono leafed with 3 in blocks



I have been working on it lately and this is where I am

Cut the fenderwells out





EDC installed



I just started bagging the front yeserday. Does anyone think this look ok? its just tacked up there for now

That bag needs to be compressed a lot more.

I just have the jack pushing up the wheel for know. it will go all the way up

Okay, so is that "laid out" per say? Is the bottom of the tire even with the crossmember? If so, the bag needs to be fully compressed right there, or you're wasting lift and ride quality.

its pretty much even but the tire is still hitting the apron where the fendwerwells used to be i need to cut more to go a little highter

Make it even, then fully compress the bag to 3".

I have a problem though when i let it all the way down the UCA hits the upper bracket of the bag

You have some options.

- Trim the uppers where it hits.
- Tube uppers.
- Section lower arm and drop bag down.
- Notch frame and push bag in farther.

damn dude looks good

needs t0 look more like this