93-97 bagged rangers question

i lookin into four-links today from suicidedoors. i was just wondering wut was the best four-link to run with a 94ranger.

MINE IS A PARALLEL WITH A PANHARD 2 HARD

reverse is bad mmmk? also id would get the square tube one from SD there pretty beefy.

I HAVE A TWO LINK WITH A BAR WELDED FROM LINK TO LINK --- NO PANHARD --- IT WORKS GREAT AND NEVER HAD A PROBLEM -- JUST SOME BOX TUBING AND SOME SUICIDEDOOR BUSHINGS ... PEACE !!!!

I am just running jasons superlift fourlink. works great and is really easy to put in

I am just running jasons superlift fourlink. works great and is really easy to put in

bagd ranger......you have a two link with a bar welded across to conect them... i sure hope you dont drive that truck much.... i had the same thing off a truck i bought to fix up from someone and i didnt know any better... well when i took everything aprt to re backhalf the truck the bar in the middle was only being held in the pressure of the two link bars because they cracked from a lot of stress about one inch in from the weld.. very unsafe design for a truck that gets use....

"PASCAL" --- WELL AS YOU CAN SEE I DRIVE THE TRUCK FROM THE PIC BELOW --- AND I DO DRIVE IT EVERYCHANCE I GET AND ACTUALLY IT WAS A DAILY DRIVER FOR ABOUT TWO YEARS WITH THE SUSPENSION LISTED ABOVE -- THIS TRUCK HAS BEEN TO SHOWS MANY HOURS AWAYS AND THE SUSPENSION HAS NEVER GIVING ME A PROBLEM -- AND I WOULD PUT MY SUSPENSION UP AGAINST ANY ONE THAT IS WILLING TO DRAG IT ON ME --- ( BY THE WAY "PASCAL" U STILL HAVENT GOT THAT " A/C " GOING ) -- PEACE !!!! AND ONCE AGAIN IM JUST THE GUY THAT ASKED THE QUESTION MY 2 CENTS ......

NOT TOO GO OFF TOPIC BUT --- DOESNT A VERY REPUTABLE SHOP BY THE NAME OF SILVER STAR CUSTOMS MAKE A KIT SIMILAR TO THE ONE DESCRIBED THAT I USE ON MY VERY OWN TRUCK --- ( THATS FOR THE COMMENT MADE BY PASCAL )

Originally posted by Dejavu



bagd ranger......you have a two link with a bar welded across to conect them... i sure hope you dont drive that truck much.... i had the same thing off a truck i bought to fix up from someone and i didnt know any better... well when i took everything aprt to re backhalf the truck the bar in the middle was only being held in the pressure of the two link bars because they cracked from a lot of stress about one inch in from the weld.. very unsafe design for a truck that gets use....so pascal you are saying that a bar from link to link is not safe! well like you said you bought a truck already fixed up with the same set up as me and baged ranger and by you knowing about the suspension on that truck you still bought the truck well how safe is that!.well for those people who build there trucks! if you do it right it will be safe.