Air ride on scions?

im considering getting a accord or scion tc. wandering if the tc will accept air cylinders. anyone tried it yet?

my strut bags in the front do the same clanking unless i ride slammed

Im running the FBI kit and the only noise I get is when im lifted all the way and the road cond . hwy driving is sweet.
For the postive camber up front im told there might be a kit out soon to correct that and give another 1" to the lift. which we need.

the airlift sleeves for the back suck. my friend has an xb with airlift in front and back and the back right bag has blown 3 times now.. airlfit just keeps sending him new bags. he tries to explain that its not being limited. the stock shocks dont limit the bag like they're supposed to and the bag pulls off the bottom plate..

well tell him to get new shocks then houston

my point is the kit is supposed to be bolt in and use the stock shocks.. BS!

ahh I see

i made a kit that was only 1200 dollars that included bags, struts, valves, comp, tank, everything needed complete bolt in except for a few tacks on the rear upper cups stock shocks stock struts, its on my personal xB no noises... nothing for 30,000 mile on 19" wheels and tucks top of wheel

yeah airlift rear sleeve bags are crap go with the contech 2500 bags and with the shorter shocks on the rear you will get another 1" drop. . you guys running your tanks inside ? or underneath for the clean look

i have used he airlift kit on the xb worked awsome,,no problems except you need to slot the upper hole on th e strut knuckle so that you can camber the wheel in to clear with anythin bigger than a 17,,,i jsut started a scion tc the front is mcferson like the xb but the rear is toally differnt than anything else they have done,,sorta like the matrix in a way bt th estrut is way shorter,,i will show the rear setup after i get it designed