hydro volts

the truck i just got has 6 solenoids,a 72 volt system.i need to know how to change it to a 48 or 24 volt.i have two pump,four dump setup.

i forgot,this is so i can see about getting one of those street chargers.

just take batteries out of the system... 2 batts-24 volt system, 4 batts-48 volts... or if u really wanted all the batts, u could hook them up in parellel, ud get the same volts, more amps... u have them in series, same amps, more volts...

Streetcharger makes one a 72 volt system. I've got one in my maxima and I havent had very good luck with it. But could just be me.

so the volts are just in the batteries and by taking one out (running 4 batteries) that will give me a 48 volt set-up and allow me to get a streetcharger so my shit can become free of overnight charges? if that about sums it up,thanks guys.

i also have a streetcharger. they dont keep your batts close to full charge, about half if that. i just keep it in there just in case. i charge my batts like i dont have the thing,

go to layitlow.com for most hydro questions you have im 99 percent sure they have wiring diagrams too. and the streetchargers are only ment to keep the batts topped off if your switchhappy it isnt gonna be that noticable. its like charging your batterys on trickle charge.

im not tryin to say you a lier john but they dont do that,im not switch happy at all, i get the car up,drive to my destination,and dump it. batts are never charged close to full

so is a gimmic or what?