layin frame big wheels without cutting bed

is it possible to lay frame on big wheels without cutting into the bed over the axle. i know wheel tubs are a must. i have a 2000 F150 and want to lay frame 24s with wheel tubs but without cutting out for the axle. any ideas?

I dont know that much about fords but 24 are pretty big so i'm going to say you have to cut the floor or raise the entire floor to clear the axle.

You can lay tranny crossmember without cutting the bed on 20's,but to lay frame on 24's you're going to have to cut the bed.You can bodydrop the bed enough to clear the notch and keep a solid bed floor.

you gotta throw most of the truck away to make room for 4s dude!

don't be a pussy just cut it

Install an Independant rear suspension and ditch the solid rear axle...the independant dont move

Originally posted by Captain Quicktoy



Install an Independant rear suspension and ditch the solid rear axle...the independant dont move

to have the irs high enough so it lays 24s on an f150, your more then likely going to have to cut the bed floor.