The Sanden 708 AC compressor clutches on these can be removed without releasing refrigerant.
The AC clutch must be held stationary, and the AC clutch nut removed using a 19mm socket. Of course the AC belt must be off as well.
The loaner tool I got did not fit the Sanden 708 AC clutch, so I had to make my own puller.
I drilled three holes into a large washer and got three 6mm x 1.0mm x 50mm long hex head screws. For the other part, I ground grooves in a washer so that those 6mm screws would have clearance. The
Created By: Cusser