bagging the rear of a blazer

ok so right now i am running bags over leafs, without a notch. but i am getting ready to notch and link the rear, just wanted to know how people have done their blazers, and if anyone makes a bolt on kit for the blazer. check out my blazer on here and let me know what u think.

anyone anything?

Check out suicidedoors.com. They have a bunch of useful stuff on there. Laters.

LOSE THE BODYKIT Skirts are for chicks bro!

silver star customs has a good 2 link system I am running it on my blazer check it out

I've done a number of these two door trucks. If you're not going with a huge wheel, maybe an 18 or a 19 you can get away with running the stock crossmember forward of the rear. An ART TRI-1000 4 link works well on these trucks. Knock off the spring hangers and the perches, get your lower links in and run your upper links triangulated to the bottom of the driveshaft crossmember. Works very well on these trucks.

hey thanks alot guys, also, i was on the area 51 site and i saw a blue blazer with caddy tail lights, what kind of money is in that. also do u by chane know the cost on the 4-link form ART?

THE 4-LINK FROM ART IS GOING TO COST YOU.BUILT THEM YOURSELF..IT'S CHEAPER..

you dont need a huge notch if your not running big wheels in the rear the bolt in notch from suicide doors works fine and if you have any more questions check out www.blazinlow.com

s.i.c. has a bolt in kit i beleve that will lay the body on the pumpkin (center section of the differencial) but will not lay frame depending on tire/wheel combo