These god damn bastard bitch bushing

anyone have a clue how in the F*CK you get the lower control arm bushing in the frame out? ive been pounding and grinding and pounding and banging and they have not moved a fuckin millimeter, two days wasted.......not one bushing out and i have the other one to do. Please help

use a torch

lol, they are fun, here is a tech article on putting in some byc arms, I made a quick tool that did the job. I had one that was rusted allot and endedup using a sheetmetal sheer type of tip on a air chisel. But the tool that I built works for most.
http://www.lowdowncustom.com/tutoriaux-d4.html?os

torch x 2

also, if you have allready used a torch, then this tool probally won't work because it pulls mostly on the rubber. Just a FYI

yeah the rubber was shot, so all that outter rubber and metal has been cut off with a cutting wheel and grounded down. but ill check out this tech article and im sure it has what i need to know

torch it is

Hey Phil, which way do the bushings go out? twards the front of the truck, or twards the back?

front 2 the back.http://www.lowdowncustom.com/modules.php?set_albumName=shawn&op=modload&name=LDC&file=index&include=view_album.phpGo here for bigger pics u can click on and blow up.

I had a problem with removing mine & I didn't have a torch, so I ended up drilling several small holes side by side to the pin finally collapsed in on itself. Hope this helps.