KW arms

without the shims the crossmember still wouldnt lay. it was higher off the ground. when i added shims then the frame went lower to the ground. i donno im gona take the shims out and see what i get.but i knwo it will be higher off the ground.
im not running spindles. kw said i can lay 18s without spindles
ill take pics too. tommorw i will f with it. im not understandin how people are laying out? my uppers must be too long or short i donno???? im confusedddddd

i just told you why, the camber is more negative, which makes the top of the spindle have more of an angle, which is the same angle the balljoint is is leaning at.

i just want mine figured out so I can finish baggin it already... its holdin me back!

Originally posted by 1lonisn



My toyota lays perfect on 18's, and right now we put 20's on the front, and it still lays out great. my 18's are 215/35's and the 20's were 245/35's. I am taking the 20's back off, we were just test fitting.

do u have drop spindles????

Originally posted by jcordova



At least you guys have control arms.

Yep I'll second that, I am still waiting

Originally posted by tenagator



Originally posted by 1lonisn





yep. My toyota lays perfect on 18's, and right now we put 20's on the front, and it still lays out great. my 18's are 215/35's and the 20's were 245/35's. I am taking the 20's back off, we were just test fitting.

do u have drop spindles????

no im shiiming at the cross shaft not he ball joint. im gona try stocks tonite

I think that the screw in style yota uppers they are using dont have enough articulation.

ok so tonite i took the rubber boot off the uppers and and jacked the lower arm up jus like i said the upper ball joint is binding in return not letting me lay out and also not lettin the bag compress fully. i do have pics and will post some soon.

I got your fix sitting in my garage Mike. I just need your address again.