layin out the front of s-10

ok if i notch the frame for tie rod ends and cut some off the upper cup for my bags is it posible to lay it out with out spindals my tires are 195/65/r15

your lower controll arms are going to hit the frame, you will need to cutt you upper cups down to 2", and notch for steering.

dont cut your cups down.. that's the stupidest shit in the world.. whatever you take off of your cups, you loose twice that of lift. so if you take .5" off, you loose an inch of lift.

cut the humps out of your lca's and plate them up, notch for the tie rods.. if you're using SD's cups, you'll lay out like that with spindles.

control arms are alredy notched and i have plenty of lifti am not running big tires so if i cut 2 inches off top cups and notch for tie rods i will lay it out

Originally posted by TIMS10PROG



control arms are alredy notched and i have plenty of lifti am not running big tires so if i cut 2 inches off top cups and notch for tie rods i will lay it out

what cups do you have? if you have SD's cups, then they will lay a 27 or 28" tall tire without cutting..

do as you please, just remember, 2" at the cup is loosing 4" of lift.

just buy spindles like everybody else

yes they are suicide cups with air lift bags and they are fully copressed dont have money for spindals

S-10 spindles are the least expensive spindles out there... quit being a cheap bitch.

Just wait and buy spindles, don't worry about laying right now

"do it right the first time, cuz its cheaper"

i just got a pair of spindles for 152 shipped.. belltech from summitracing.com save and buy em, you'll need em.. i'd rather lay out then hack the shit out of my truck.