20's on a pretaco

When your "laid out" you can change lanes and that's about the most you will want to do. I know of this because I have done it, had to dodge a man-hole cover while draggin'. Other than that I would not recommend any more turning that that while all the down. I don't have any problems with it rubbing anywhere in the bed but I have tubs done so that may have something to do with it.

I know I don't have a Yota but I run Yota parts. Find a wheel like mine 20x7.5 with a +45 offset and it still has a lip! Yeah the 225/30/20 make a big difference. It should help with the body drop too!

What the deal is my buddy won the detata wheels on the IF cruise to Greenville and he can pick any wheels up to 22in. the problem is we drag yotas and detata dosn't offer much on fwd wheels they jump from 18in. to 20in. we don't want 18's and the thinest 20's are 20x8 with +35mm offset so thats what he has coming we will ether make them work or he will just have 20's on his daily driver which isn't to bad considering they are FREE. Lucky S.O.B.!!!!!!!!!!

If your not body dropped it might not be bad at all,I was talking body drop...

Narrow your rear end.

cant narrow the rear end on a yota cause no one wants to make new axles because of the taper. you can always buy a ford nine and narrow it and have a new yoke put on your driveshaft. but i have mkw mk20s on my yota and they have a 35 mm offset, and they tuck fine. 20 x 8.5.

what do you have to do in the front to lay with the 20's? can you lay with stock control arms 2in. drop spindles and a small Z to lay rails? You probably would have ball joint issues right. I think it is probably going to need control arm work done right?