im running hydro hose cuz of some bad experiance with plastic line.
lays low
+1y
i get that same thing, my problem is that the valves need a certain amount of pressure behind them to keep the diaphram closed. so when u are layed out there is zero psi so the dump stays open and when u air up air escapes through the dump untill it catches and closes. hope that helps
Dejavu
+1y
Originally posted by lays low
i get that same thing, my problem is that the valves need a certain amount of pressure behind them to keep the diaphram closed. so when u are layed out there is zero psi so the dump stays open and when u air up air escapes through the dump untill it catches and closes. hope that helps i have never heard of that problem... you should try rebuilding your valves.
TwistedMinis
+1y
Originally posted by aftershock
the bags arent fully compressed when laid out.
This is probably your problem.
LOWSILVERALDO
+1y
if your dump leaks at first i had that problem one time so i put a fitting on the outside of the valve so it has pressure to close the dump valve back
nrskinny
+1y
I have the same problem with mine. But I figure its because 1)the bags arent fully collapsed ( Which Im glad because if I park on unlevel service it can still move if needed ) and 2) My truck weighs 3,400lbs on the front. Once its up I can almost get it to hop, but from laidout its much slower.