97 GMC 1500 B/D with 22's question

Originally posted by bdroppeddak



mine didnt, i ran 35+mm offset, and didnt even have to trim the fender lips, i have an inch of clearance on each side from the wheel.it took me for ever to find rims with a decent offset, who makes the +35?

DOORED ON 22'S RIGHT HERE:

imo a stock flor would be eisier than traditional plus you dont loose head room

i clear just barely with 255-30-22s with 9.5 rims prety deap dish 2

mine is a 94 model with a 3" tradtional BD. with a +14mm offset wheel

are you guys running a dropped spindle at all?

Originally posted by jeremyhudson



are you guys running a dropped spindle at all?

yes. you pretty much have to. 2" drop spindle.

Originally posted by STUD1Y



Originally posted by bdroppeddak



mine didnt, i ran 35+mm offset, and didnt even have to trim the fender lips, i have an inch of clearance on each side from the wheel.it took me for ever to find rims with a decent offset, who makes the +35?



several people do. my friend is a wheel dealer, so he just called his supplier, and the guy looked through all brands of 22s he had with a 5x5 pattern, and told me what i could choose from that had an offset over +30mm.

i'll give you a hint. jeep.

Originally posted by bdroppeddak



i'll give you a hint. jeep.

i did that on a couple sets, and ended up the center bore wasn't correct, and if i had drilled them to fit, the center cap wouldn't fit.

headaches. i don't miss them.