Por 15

So i undercoated my frame with Por 15 right well it came out good BUT i read the can said wear glovs when iw as all done the shit ate though a litle bit i have little spots on my hands anyone knpow what i can use to get the stuff off?

The only things I could disolve POR15 on my hands with were either thinner, gun wash or gaz.. ..that stuff is really hard to remove..

Basically you have to wait for it to wear off. It will take about two to four weeks.

They make a thinner for POR 15. That what I used to thin it down to spray it.

It kinda hurts but i've found the only good way to remove it is to literally scratch it off along with a little skin. if you wash your hands a bunch with some coarse automtive style hand cleaner that will speed up the process also. if you get a substantial amount on yourself consider it a 2-3 week tatoo cause it is not coming off.

Time takes it off. I can't even look at a can of that stuff without getting it on me.

You should try with a grinder and a wire brush, but I don't garantee the result.. hehe

lol if i get some on my skin, i wash it off w/ thinner, RIGHT then or its on tehre for a while. also you dont have to thin it down to spray it, but youcan.

last time I got it on my skin I took aome wet sand and a tooth brush and rubbed it into my skin and it came off. It wasnt the most pleasant thing but it worked

Originally posted by killswitchmsi



So i undercoated my frame with Por 15 right well it came out good BUT i read the can said wear glovs when iw as all done the shit ate though a litle bit i have little spots on my hands anyone knpow what i can use to get the stuff off?

Post some pictures of what you painted. I'm going to use some and want to see the end results. Thanks!