anybody in AZ exp'd in hydros wanna make $$$?

i THINK that's the only reason it's messing up.

i tested the solenoids, they're good. my wiring is fine. the motor itself works. tested the switches, they're fine. all that and the rear just CLICKS (noids).

the front works fine.

when i hook both pumps up to the front bank of solenoids, only one end will lift (either front only, or rear only). i understand weight will affect how evenly it lifts, but both motors should spin regardless and they don't. and when wired like this, the rear won't dump AT ALL. just hear a THUD. don't know if it's hydrolocked or dump grounds. they cylinders aren't hung up or stuck on anything...

so i want to try and run a ground cable from pump mounts, to the same point on the solenoid/battery rack, then to another ground under my seat (where the disconnect is, then back to the negative battery post. once i can scrounge up some cash for some more cable =(.

had my hydros for 1 year and no leaks.if you still having problems hit me up....when u have some money

i know you probley checked this already but did you make sure the slow downs are open a little? mabey one turn will be enough

as for the noids just making a thud sound. you can check them one by one, one of them might not be working right and would cause the whole bank to not work.

and for a ground, just run a cable from the gropund of you battery to the body, and use that for everything else. your pumps will be grounded as long as you have everything ground off the metal your bolting them to, and your noids should be bolted down to metal somewhere too. just go around and double checkall the grounds and grind off paint and other shit.

you could also hit up Kevin Whipps @ kevinwhipps.com

Originally posted by Hamed Hatch



i THINK that's the only reason it's messing up.

i tested the solenoids, they're good. my wiring is fine. the motor itself works. tested the switches, they're fine. all that and the rear just CLICKS (noids).

the front works fine.

when i hook both pumps up to the front bank of solenoids, only one end will lift (either front only, or rear only). i understand weight will affect how evenly it lifts, but both motors should spin regardless and they don't. and when wired like this, the rear won't dump AT ALL. just hear a THUD. don't know if it's hydrolocked or dump grounds. they cylinders aren't hung up or stuck on anything...

so i want to try and run a ground cable from pump mounts, to the same point on the solenoid/battery rack, then to another ground under my seat (where the disconnect is, then back to the negative battery post. once i can scrounge up some cash for some more cable =(.

I can almost guarantee you that at least one of those solenoids is fried and thats your problem.

finally finished it.

check my profile for pics