Engine driven comp spitting out oil! HELP!

I just installed the easylift belt driven onto my truck this past weekend, and ive already had to fill it with oil twice! Everytime i check it with the dipstick, it's bone dry. It's spitting all the oil into the water trap. Is this normal to have to fill the compressor up this much? i have a feeling this is not normal. Any help is greatly appreciated!

Go to the kilby enterprises website, i think i saw a write up there that shows you how to make it not spit oil. All they did was pull the head and put a sheetmetal screw in a certain hole so the oil couldnt come out anymore. Its a york right?

yeah its a york. It's the kit from easylift. For as much as a paid for it, it shouldnt have any problems.

YEA MINE SPIT OIL OUT FOR A GOOD WHILE I THINK AFTER IT BREAKS IN IT WILL STOP BUT U STILL HAVE TO CHECK IT LIKE ONCE A WEEK THATS HOW MINE LOCKED UP CAUSE I DIDNT CHECK THE OIL BUT IT SHOULD STOP SPITTING IT OUT AS MUCH AFTER LIKE 2 WEEKS

ya its slow down once its broken in.

Check out this link, its supposed to help reduce the oil the york spits out after the compressor breaks in.

http://www.rockcrawler.com/techreports/york_mod/index.asp

I appreciate all the help guys! thanks!

mine is 7 months older and still spits a ton of oil. its just something you live with. i've heard good and bad about blocking the hole. its been so long i forgot where i've read either.

hell let it spit back into a reserve then you will always have oil when its not overfilled....

not the best kit to have boughten but since you already have it i would call and get a new one, ive never had that happen with any of my yorks and i use them on everything, i add oil like every 6 months.