Narrowed axle

hills hot rods out of lubbock can do it for ya will run you about 650 if i remember correctly with mosier shafts

Originally posted by bertristerf150hd



hills hot rods out of lubbock can do it for ya will run you about 650 if i remember correctly with mosier shafts

Do mosier make axle for an 05 F150?

they have a nice machine shop, they can build you new axles by going on the stockers......

Originally posted by bdroppeddak



they have a nice machine shop, they can build you new axles by going on the stockers......

Do you mean they reuse the stock axle shafts? I hear this is not the way to go.

if you bring us your axle out and apart its $550 we are in north ft worth and it takes about a week

are you a moron? read where it says new axles...... but in the ST article that shop was able to respline the stock axles on that 06, theres nothing wrong with doing that as long as the spot you are resplining is the same diameter as the stock spot.....

Originally posted by dufur2003



Originally posted by bertristerf150hd



hills hot rods out of lubbock can do it for ya will run you about 650 if i remember correctly with mosier shafts

Do mosier make axle for an 05 F150?



they make axles for anything..

Moser Eng. In IN
$110 to narrow your housing. You strip it first.
2 day turn around. I know I just had it done!

$110 to respline your axles. This can be done If they are not tapered.

They do over 600 resplines a month. Never had a problem. But to respline you have to narrow about 4 inches per side to get past the existing splines, and c clip if equipped.