Questions bout laying rocker with an Isuzu

We folded the pinch under on my 92 aand all it needed was a 2". I had a 2.6L with mine and the oil pan did blow ass. Ridiculous design.

Originally posted by dragn168



nah the clip only has to be z'd if you have the 2.6 with the retarded ass oil pan that hangs way below the frame rails also if you want to lay with stock spindles then yeah you'll have to notch the arms it not hard at all to do and when you body drop it your also going to have to relocate the torsion rods that stabilize the control arms since they are mounted to the front of the frame that will be cut and lowered for the body drop if you dont they will be at crazy angles and wont work most people just move em toward the fire wall side of the control arms



The torsion rods you speak about have to be cut off if you z the clip.....Im dropt 3 inches and they had to be cut off...no way to keep them. I have the gay ass oil pan also on my 2.6

Edited: 1/14/2007 6:53:22 PM by Layin Low 4 Life

Originally posted by ChumpChange



3 inches will lay flat rocker not angled rocker just finished one this week.

Thanks Man