Crew cab lowering Help

Sup guys im new to the site... Heres my problem.. I have a 73 crew cab 3/4 ton non dulley I have some 22s 255/30/22=28 tire size for it and im going to swap to half ton setup.. I dont like bags so i want to lower it as low as possible.. heres what i have in mind 3inch spindals 3inch springs and a flip for the back.. i still think i would need to go lower in front . i seen a 5 inch in front with 20s looked high to me.. ANY IDEAS PICTURES?

Has the same lowering kit your talking about...

what size tires are on the front of that?

man that seems like is gunna be low as hell for 22's

well the 22s im running are 22x8.5 and should sit inside pretty well

the tires were a 225-60-16

You don't like having a very smooth ride with the option of adjusting your height?

Nope LOL just rather be lowered once and done with it..

raymondsage do u have any other pictures if that dually? front shots, ground shots , ect?

that sounds about what I'm doing on my one crew cab

also the spring pads on the 1/2T aren't in the same place as the 1&3/4T so you have to cut them off and move them

Can u explain.. where