Pics of BYC toyota uppers and lowers

Just got my set of BYC arms( yes I got fucked over too!)and I need to see some pics of the lower arms and how they are ran and installed. thanks for any help.

wow, they're actually still shipping? mike must be out on probation or something

those were probably 1 of 25 sets that were "lost at UPS". maybe the only ones that really were.....

see what ryan thought of than no one else did is that you should try to buy BYC arms from someone besides mike white, that way they actually show up.

werd im totally confused as to how you just got em..

he bought a set from mike

they never came

fast forward a year and a half, he bought another set from a guy who bought a set from mike, and they came.

I'll let him eloborate on the rest.

they're not good pics & it's filthy, but it will give you an idea. you'll have to take a torch & melt out the lca bushings (this takes forever). then you take your air hammer & drive out the thin metal sleeve. it's super thin, but strong as hell. you can barely see the thing, but clean off all the dirt & you'll see it. any other questions, feel free to hit me up...good luck...

Edited: 4/27/2007 5:43:32 PM by corey0814

by the way, those are old pics & since then i've changed the lower shock mounts so they don't rub on the rim & my ground down frame spreader has been replaced by a tube setup. i also added a couple of gussets to the back of the mounting tubes to the bottom of the frame, but i'm not sure if that's totally necessary because they never felt like they were flexing, but it makes me sleep better at night knowing it's stronger & more stable before anyone starts hating..

forgot to throw you some pics of the uppers, although they're pretty self explanitory...

Thanks alot Corey, Did you basically just "eyeball" where the lower caster should be set, or did you just center the rodin the hole?