threads
Page 2 of 3
Body work and Paint \  new paint already going to shit!!

new paint already going to shit!!

Body work and Paint Q & A
views 395
replies 23
following 15
 
dirkbelt   +1y
i guess im fixin to go do some left donuts and see if i can get the rearend shift,lol
tx raised   +1y
that sucks man, thats a sick ass paint job. hope u can fix that.good luck
bodydropped   +1y
ahahahaha donuts shit dont break anything but the bed might have lined up perfectly when they bagged it might look at that and see
dirkbelt   +1y
if he cant get the paint to match i will just get him to do some graphics on both sides in those spots cause im fixin 2 get him to do the cow skull on the hood or bedcover that is like on our club banner
sideshizzle   +1y
Derek keeps it real.

I bet it could be fixed.
bodydropped   +1y
shouldnt be hard to match that spot but if it was like in your graphics then i would say it would bne hard
mindlissmetalfab   +1y
It shifted for a reason. Fix the problem. Take your box off and take a bunch of measurements and check over your rear suspension if this is a 'new' thing.
You can also look into having your hubs milled down. If there is enough meat on them, most wheel shops can take a 1/4" or so off the back to give you a little extra backspace.
dirkbelt   +1y
i just looked at that and that is a good idea cause there is about a good 1/2 inch or so that can be milled off but where would i look into havin that done and what would it prolly cost.
dirkbelt   +1y
and i looked at the rearend and its prolly a 1/2 to a 1 inch off so i will fix that and tack wield that boot to the rearend and shit.
DooredFord   +1y
happened to my gf's tacoma cuz the jackass that had the truck before us had spacers on it took the stupid spacers off and its all good now.