Weber install problem!!!!

you have to get a throttle cable off an 81-87 pup it will bolt right up

Originally posted by biguglywagon



you have to get a throttle cable off an 81-87 pup it will bolt right up

what the little guy said. hey...you wanna run to a junk yard and get me one?! i have a weber for mine!

Edited: 6/2/2007 7:25:36 AM by tealrangerpmp

Hope you guys are right im gonna try one this week, or ill just be makin myself a lil bracket. Rather do it the easy way with a cable though, now i gotta tackle the header install should be fun fun!!!!

i just orderd my webber off ebay for 299 and free shipping

the webber install on my 86 was cake. from personal experience, put a dab of locktite on the counter sunk bolts that go into the intake for the adapter plates. ive had them loosen up a couple times, which inturn is a GNARLY vaccuum leak. everytime i had to change my oil too b/c it was sucking so much gas. since i put the loctite, no problems at all. runs like a dream and gets about 28mpg, and a noticeable power increase.

when i get it on i just take all the vaccum lines off right and what do i do with the sencors do i just cut the wires off and throught them in the trash??????

bump

you guys running the 32/36 progressive or the 38 outlaw?

i gor teh 34mm for 299.99 on ebay the outlaw is a wast of money it is not that great just wasiting gas

I am runnig the 32/36, I scrapped all the vaccum lines except the one that runs to the dizzy. As for sensors i just unplugged them and tucked them in, if i do anything i will prolly just keep them tucked up, also i am going to run the electric choke wire right into the fuse box to keep it clean. Just make sure you cap all those vacuum ports there were lots of them. I also opted to not hook the carb up to the canister under the hood and it seems to run fine i just capped that port on the carb as well. It makes such a differance in appearance i couldnt believe the amount of scrap parts i had leftover after pulling all that stuff. Now i just have to clean the other side up by removing my air pump and those stupid hoses.