What 20's you runnin

So heres the deal a couple months ago I posted a question about what size i would need 20's but now i am arguing with a ebay seller about what offset I can run so I thought I would ask people that run them and go with your opinion here is what I understand fits 20x7.5 to 20x8.5 with 30 to 40 offset any help would be appreciated I wanna get the rims so I can have them for dragfest here is the link to the rimshttp://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=290032822235&rd=1,1

the 20's I got for my buddys taco were 20x7.5 + 45 and there was not much room for those

hit up the guys at RT tire www.customwheelsales.com ....i just bought some 20s for my toyota from them and the guy asked right away if my truck was slammed..he knew what offset i needed...

Edited: 5/23/2007 9:26:51 PM by BLanham

Edited: 5/23/2007 9:25:56 PM by BLanham

Same exact rims and the truck lays full body all the way around and can turn lock to lock with the truck layed all the way out. All he had to do was section out some of the top of the inside fender. Overall they fit great.

Thanks a lot guys I was looking at that truck and I thought those were the same rims but I was not sure because it has the Tacoma front end rather anything had to be cut out for those to fit I am gonna go order the ones I want thanks for clearing this up should have them in a week I will post pics when I get them

The offset will change depending on wheel width, a 20x7.5 +40 and a 20x8.5 +40 will both fit the truck different. The 8.5 will sit out farther. Offset goes off the wheel center.
Try this link.
www.1010tires.com/WheelOffsetCalculator.asp

i've got 19x9.5's up front on my truck with 18mm offset and the rear of my truck has 19x11's with a 35mm offset really if you havent already ordered them, try runnin up to a rim shop in your town, see if they have one of those wheel offset indicator deals, thats what i used. i just borrowed one from a wheel shop

I run an 20X8.5 Bonspeed and a 40mm offset. The front are kinda sucked in but the rear are pretty flush. I wouldn't run much less than a 40. I could see a problem with the bedsides with the wheel all the way layed out.

Originally posted by LSCivic



I run an 20X8.5 Bonspeed and a 40mm offset. The front are kinda sucked in but the rear are pretty flush. I wouldn't run much less than a 40. I could see a problem with the bedsides with the wheel all the way layed out.



Yeah but Steve, this only applies to body dropped trucks. j/k

yeah the seller is being a jerk off and wont sell them to me so I think I will run up to a rim shop and see if I can borrow a wheel offset indicator then I will just order the one I want i just want to get something so when lay my truck out in the future I wont have any rubbing
I found some other ones I like here
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=003&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=130105154566&rd=1,1