Page 2 of 2
Dodge Trucks \ 3rd generation ram guys, bag pressure ?????'s3rd generation ram guys, bag pressure ?????'s
views 853
replies 14
following 7
The Mayor
+1y
The pic is fine, what size wheels and tires you runnin? What is the offset of the wheel? My 20x8's just barely clear the fender lip during articulation, looks like yours clear fine.
slammedram
+1y
those are 24X10 with a +25 offset running a 295/35 tire is right at 32". i have the bed sides flaired out and the fender lip is rolled flat. i want to narrow the axle and get a new bed.
The Mayor
+1y
Hey loudciv,
How much lift you get with that 70 PSI? What is your ride height? And finally, how much do you clear those 24's by at 140 PSI?
How much lift you get with that 70 PSI? What is your ride height? And finally, how much do you clear those 24's by at 140 PSI?
loudciv
+1y
Edited: 7/10/2007 7:12:27 AM by loudciv
70psi puts my fender lip at the top edge of my rim, basically tucking tire. 140psi puts me 3/4" above the tire, 150psi maxes out my balljoints. rear is a little low in this pic, but it will give you an idea.
70psi puts my fender lip at the top edge of my rim, basically tucking tire. 140psi puts me 3/4" above the tire, 150psi maxes out my balljoints. rear is a little low in this pic, but it will give you an idea.