K
bio max's spindles
Tacon19s
+1y
Tacon19s
+1y
Tacon19s
+1y
Just tried posting a pic I have of them. I plan on getting them myself...im tired of boggling my mind to figure this shit out with my front set-up.
JPerry
+1y
HEY Max do u build s-10 spindels too? Im looking for some that will allow me to run shocks without rubbing through them when trying to turn. My turning radius fuckin sucks when I run shocks, but the ride is so worth it I run the slam RE-7's all around. Also at full lift which is redick, my passanger side locks up on me sometimes it pisses me off, also Im about 1 inch from laying up front (on 18" wheels w/ 235/40/ZR18 tire) cause the lower stock spindels bind on the frame. So mabey I just need kustom lowers Oh and my ball joints are starting to rip apart so for now I put some high quality silicone on them helps quite a bit.Full LiftAired out
bdroppeddak
+1y
you can get some tubular arms and lay 22s with no problem with s10 drop spindles..... the shock thing has nothing to do with the spindle, you will just need to notch the control arm to move the shock in so it doesnt rub the tire/wheel....
JETSETTER
+1y
Edited: 7/11/2007 11:06:54 AM by NR_DRAGYRS
MAX ROCKS He's the The Grand PooBah, and he don't make enough He likes doing this shit, it makes him He's just the Greatest Max, Hope to see you soon!
MAX ROCKS He's the The Grand PooBah, and he don't make enough He likes doing this shit, it makes him He's just the Greatest Max, Hope to see you soon!
mindlissmetalfab
+1y
Originally posted by JPerry
HEY Max do u build s-10 spindels too? Im looking for some that will allow me to run shocks without rubbing through them when trying to turn. My turning radius fuckin sucks when I run shocks, but the ride is so worth it I run the slam RE-7's all around. Also at full lift which is redick, my passanger side locks up on me sometimes it pisses me off, also Im about 1 inch from laying up front (on 18" wheels w/ 235/40/ZR18 tire) cause the lower stock spindels bind on the frame. So mabey I just need kustom lowers Oh and my ball joints are starting to rip apart so for now I put some high quality silicone on them helps quite a bit.Full LiftAired out
umm Lower stock spindles...wtf? I think you are talking about control arms dude.
HEY Max do u build s-10 spindels too? Im looking for some that will allow me to run shocks without rubbing through them when trying to turn. My turning radius fuckin sucks when I run shocks, but the ride is so worth it I run the slam RE-7's all around. Also at full lift which is redick, my passanger side locks up on me sometimes it pisses me off, also Im about 1 inch from laying up front (on 18" wheels w/ 235/40/ZR18 tire) cause the lower stock spindels bind on the frame. So mabey I just need kustom lowers Oh and my ball joints are starting to rip apart so for now I put some high quality silicone on them helps quite a bit.Full LiftAired out
umm Lower stock spindles...wtf? I think you are talking about control arms dude.
BioMax
+1y
Edited: 7/11/2007 10:24:03 PM by BioMax
Wow Kerry, I like you too buddy, but...WOW!
JPerry, I think that all of us have had the exact problem that you are experiencing with the wheels rubbing the shocks, but the only real cure is notching the shit out of the lower arm to pull the shock in far enough to stay clear of the wheel...That's it.
Wow Kerry, I like you too buddy, but...WOW!
JPerry, I think that all of us have had the exact problem that you are experiencing with the wheels rubbing the shocks, but the only real cure is notching the shit out of the lower arm to pull the shock in far enough to stay clear of the wheel...That's it.
slammed94ranger
+1y
Where can we order these spindles? I'm getting ready to order arms and spindles and its either these or belltechs.
BioMax
+1y
You can call me at (951)654-3195