Caprice A-arms Check these pics out

Straight axle that thing.

^^ what he said. make it useful.

sorry i forgot, but i'll check tomorrow, but if robert says thats how its supposed to be, i would get he's right, we've built a couple hundred sets of caprice arms, and he's installed a ton of them..... but i'll put it on my agenda tomorrow morning to make sure...

if you have the tools yourself.. just make a template out of the good one and buy plate and tubing and make new ones?

Originally posted by bdroppeddak



sorry i forgot, but i'll check tomorrow, but if robert says thats how its supposed to be, i would get he's right, we've built a couple hundred sets of caprice arms, and he's installed a ton of them..... but i'll put it on my agenda tomorrow morning to make sure...

Chris I really appriciate it. I actually called the shop there and spoke witha woman she said someone would call me back.I really appriciate everyones input i know this is Fucked up commmin on here for lift ?'s but this is how it should be handled. I have been on the Eastcoastryders.com forum and eveyone is a bunch of butt holes no one wants to tell you anything and where this high rising scene is so fresh you just cant open up a mag and find everything you need. My blood runs deep in minitruckin and thats how i got started in cuctom rides. I am just checking out another scene. Once again Thanx everyone

bump

Originally posted by FarBeyondDriven



if you have the tools yourself.. just make a template out of the good one and buy plate and tubing and make new ones?

I dunno which one is the good one

i should have gotten on here at work when i found out, but anyways, the arms are different because if you look at the mounting points, they are different, the driver side is different to accomodate the steering box.... so if you make mirror images of one, one side's caster will be thrown way off..... they are fine, throw em on there....

if you need to know which goes where, lemme know i'll find out and post tomorrow mornin.....

fyi, the place i work for might get into building minitruck control arms, since we can pump out 15+ sets of donk arms a day if needed, unlike the huge wait times all the other shops had doing minitruck arms....